At S N Group of Environment, Effluent Treatment Plants (ETPs) are engineered as custom process solutions, not standard equipment packages. Each ETP is designed after careful assessment of influent characteristics, load fluctuations, reuse objectives, and regulatory compliance requirements. We deliver end-to-end ETP solutions covering process design, engineering, supply, installation, commissioning, and operation, integrating suitable physico-chemical, biological, and advanced membrane technologies to ensure consistent performance, high water recovery, and long-term compliance.
Why an ETP is Essential
Mandatory for obtaining CTE & CTO approvals from Pollution Control Board
Prevents environmental damage and regulatory penalties
Enables water recycling and reuse, reducing fresh water consumption
Ensures safe handling and disposal of industrial effluent and sludge
Supports sustainable and responsible industrial operations
Effluent Treatment Plant ETP – Process Overview
A typical Effluent Treatment Plant ETP designed by S N Group of Environment follows a systematic and engineered process for effective industrial wastewater treatment. The ETP system consists of Preliminary and primary treatment for removal of solids, oil, grease, and grit ,Biological treatment for reduction of organic load such as BOD and COD,Tertiary treatment and polishing to achieve discharge or water reuse standards Sludge thickening, dewatering, and safe disposal systems.
Each stage of the ETP process is carefully engineered based on wastewater characteristics, flow variations, reuse objectives, and regulatory compliance requirements to ensure stable and long-term plant performance.
Applications of Effluent Treatment Plant ETP
Our industrial ETP solutions are suitable for a wide range of wastewater treatment applications including:
Manufacturing and process industries
Slaughterhouses and food processing units
Hotels, malls, hospitals, and commercial complexes
Automobile service centers and vehicle washing facilities
Textile, plywood, paper mill, and allied industries
Industrial estates and mixed effluent sources
Compliance and Design Focus
All Effluent Treatment Plants ETPs are designed in compliance with CPCB and SPCB norms applicable to Green, White, and Red category industries. We provide complete support for:
Consent to Establish (CTE) and Consent to Operate (CTO) documentation
Inspection readiness and regulatory audits
Stable plant performance during Pollution Control Board monitoring
Result-oriented and sustainable wastewater treatment operations
ETP Technologies We Offer
We design and execute Effluent Treatment Plants using proven and advanced wastewater treatment technologies such as:
SBR – Sequencing Batch Reactor
MBBR – Moving Bed Biofilm Reactor
MBR – Membrane Bioreactor for high-quality reuse
ASP – Activated Sludge Process
UASB – Upflow Anaerobic Sludge Blanket Reactor
ABR – Anaerobic Baffled Reactor
Request Technical Discussion